Speakerphone - Lucent Technologies DEFINITY 8405B User Manual

Speakerphone

Note: If you are using an 8405B or an 8405D voice terminal, you cannot use this
feature. If you are using an 8405B Plus or an 8405D Plus, you have either the
Speaker (listen-only) feature or the Speakerphone (listen and talk) feature. If you
are uncertain whether your voice terminal is set for the Speaker feature or the
Speakerphone feature, check with your system manager.
Use the following procedures if your voice terminal is set for the Speakerphone
(speak and listen) feature.
If the Reset Spkr label appears under the
8405D Plus voice terminal, you can use the Reset Speakerphone feature. For
directions on using this feature, see "Reset Speakerphone" in this section.
To place/answer a call
without lifting the
handset, or to use
speakerphone with
any feature
Speaker
1
Press
Speaker
•
Red light next to
2
Place or answer the call, or access the selected feature
3
Adjust speakerphone volume if necessary
•
To raise the volume, press the right half of the
Volume control button labeled
to lower the volume, press the left half of the
Volume control button labeled
•
If you have a display, it shows
SPEAKER
(There are eight possible volume settings. On the
display, one arrow is the lowest setting, and eight
arrows is the highest setting.)
Note: The Volume control does not affect an
external speakerphone attached to your voice
terminal.
button on your 8405B Plus or
Speaker goes on steadily
;
L>>>>> H
38