Priority Calling
You can access this feature with the softkeys only if your voice terminal has a display.
To place a priority call
(3-burst ring)
To change a regular call
into a priority call
(3-burst ring) when you
hear a call-waiting
ringback tone
1
If you are using an 8405 with a display, press
and then press the softkey below PCall
(while off-hook)
If your 8405 does not have a display, press
(while off-hook)
or Dial the Priority Calling access code __________
(while off-hook)
2
Dial the extension
•
Wait for the called party to answer
1
If you are using an 8405 with a display, press
and then press the softkey below PCall
If your 8405 does not have a display, press
•
Called party receives a priority call-waiting tone
(3-burst ring)
2
Wait for the called party to answer
Note: If you still receive a call waiting ringback
tone, wait a few minutes and try again.
Menu
Priority
[dial tone]
[ringback tone]
Menu
Priority
31