Resetting The Speakerphone With The Softkeys (When Powering Up The Voice Terminal) - Lucent Technologies DEFINITY 8405B User Manual

Resetting the Speakerphone with the Softkeys
(When Powering Up the Voice Terminal)
Important: You need to use the Reset Speakerphone feature only if your voice
terminal has the Reset Spkr label printed under the
procedure is only for the 8405D Plus voice terminal.
When you first power up the 8405D Plus voice terminal, the following display
appears on those sets equipped with the Reset Speakerphone feature.
When you reset the speakerphone on your voice terminal, you hear a set of tones as
the speakerphone performs an acoustic test of the environment. When the tones
stop, your speakerphone has finished adjusting itself for optimal performance and is
ready for use. For more information about the Reset Speakerphone feature, see
"Reset Speakerphone" in the section Voice Feature Procedures later in this guide.
To reset the speakerphone
(when those 8405D Plus
voice terminals with the
Reset Spkr label are first
powered up)
PLEASE RESET SPKR.
Begin
1
Press the softkey below Begin to reset the
speakerphone
(Press the softkey below Cancel if you do not want to
reset the speakerphone at this time. However, note
that the red light next to
flutter.)
•
If you press the softkey below Begin, the display
shows the following timed screen:
OPTIMIZING PERFORMANCE
OF THE SPEAKERPHONE.
•
You will hear a set of rising tones as the
speakerphone adjusts itself to the surrounding
acoustical environment. These tones are
automatic. No user response is required.
Speaker button. The following
Cancel
will continue to
Speaker
16