Last Number Dialed
To automatically redial
the last number you
dialed (up to 24 digits)
(extension, outside
number, or trunk/feature
access code)
To see the number you
last dialed (you must have
a voice terminal with a
display, and you must be
on-hook)
Leave Word Calling (LWC)
You can access the Leave Word Calling feature (LWC) and the Cancel Leave Word
Calling feature (CnLWC) with the softkeys only if your voice terminal has a display.
To leave a message after
dialing an extension
(when call is not
answered, or you hear a
coverage or busy tone)
1
Press
Last Dialed
or Dial the Last Number Dialed access code
__________ (while off-hook)
•
Number is automatically dialed
Note: Available with a DEFINITY Generic 2 and
with System 85 R2V4 and some R2V3 systems.
Check with your system manager to learn if the
feature is available on your system.
Limitations on this feature should be noted. Digits
dialed via Abbreviated Dialing, feature dial codes,
authorization codes, and Station Message Detail
Recording (SMDR) account codes are not retained in
memory and must be redialed for each call.
1
Press
Last Dialed
•
Last number dialed is shown on the display screen
1
If you are using an 8405 with a display, press
and then press the softkey below LWC after you
complete dialing
If your 8405 does not have a display, press
time after you complete dialing
•
Message light goes on at the called voice terminal
(if so equipped)
Note: If reorder tone is heard, the message is not
stored; try again.
(while off-hook)
(while on-hook)
[confirmation tone]
Menu
any
LWC
28