Speaker - Lucent Technologies DEFINITY 8405B User Manual

To send an assigned group
of extensions (except
priority, intercom, and
personal central office
calls) immediately to an
assigned extension,
AUDIX, or message
center for coverage
To cancel Send All Calls
or SAC Group

Speaker

Note: Your voice terminal is set for either the Speaker (listen-only) or the
Speakerphone (listen and talk) function. Check with your system manager to see if
you can use either of these two features.
Use the following procedures if your voice terminal is set for the Speaker
(listen-only) feature.
To place a call without
lifting the handset, or to
use speaker with any lis-
tening-only feature activ-
ity (such as, monitoring a
call on which you have
been put on hold or for
group listening)
Note: In order for the
other party to hear you,
you must speak through
the handset and the
speaker must be off.
1
Press SAC Group
1
Press Send All Calls
(while on-hook or off-hook)
or Pick up the handset and dial the Send All Calls
cancel code __________
•
Your calls ring at your own voice terminal again
1
Press
Speaker
•
Red light next to
Mute go on
2
Place a call or access the selected feature
3
Adjust speaker volume if necessary
•
To raise the volume, press the right half of the
Speaker Volume control button labeled
to lower the volume, press the left half of the
Speaker Volume control button labeled
(while on-hook or off-hook)
[confirmation tone]
or SAC Group again
[confirmation tone]
and the red light next to
Speaker
,
;
.
36