When the panoramic sliding roof is in the comfort position, the intensity of the
wind noise is reduced.
CAUTION
It may be necessary during winter to remove any ice and snow in the area of the
panoramic sliding roof before opening it, in order to prevent damaging the open-
ing mechanism.
Closing the panoramic sliding roof
Closing
–
Turn the switch to position
Force limiter
The panoramic sliding roof is fitted with a force limiter. The panoramic sliding roof
stops and moves back several centimetres when it cannot be closed because
there is something in the way (e.g. ice). You can close the panoramic sliding roof
fully without force limiter by pressing down the switch on the recess and then
pushing it forwards until the panoramic sliding roof is fully closed ⇒
WARNING
Carefully close the panoramic sliding roof - risk of injury!
Opening and closing the sun screen
You can open or close the sun screen separately with the aid of the buttons
⇒ f ig.
22.
Using the system
Safety
⇒ f ig.
A
21.
Fig. 22 Buttons for sun screen
Driving Tips
Opening
–
Briefly press the button
–
Press the button
tion. The opening process stops when one releases the button.
Closing
Briefly press the button
–
Press the button
–
tion. The closing process stops when one releases the button.
Convenience operation
You can also operate the panoramic sliding roof and the sun screen from the out-
side using the remote control key.
Closing the panoramic sliding roof
Hold down the lock button on the remote control key until the panoramic slid-
–
ing roof is closed. The panoramic sliding roof and the sun screen are closed to-
.
gether.
The closing process stops when one releases the button.
Tilting the panoramic sliding roof
Hold down the unlock button on the remote control key until the panoramic
–
sliding roof is tilted. When tilting the panoramic sliding roof, the sun screen
opens at the same time.
Note
● The force limiter also operates for convenience closing.
● The panoramic sliding roof can only be tilted but not opened when the con-
venience operating feature is being used.
General Maintenance
Locking and Unlocking
⇒ f ig. 22
E
in order to fully open.
E
and hold it pressed in order to open in the desired posi-
⇒ f ig. 22
in order to fully close.
F
and hold it pressed in order to close in the desired posi-
F
Breakdown assistance
43
Technical data