Voice Control - Skoda Yeti Owner's Manual

Skoda yeti
Hide thumbs Also See for Yeti:
Table of Contents

Advertisement

124
Communication

Voice control

Dialogue
On vehicles which are factory-fitted with the navigation system Co-
lumbus, it is only possible to operate the voice control via this navi-
gation system, see the operating instructions for Columbus.
The period, in which the telephone system is ready to receive voice commands
and carry out the voice commands, is called DIALOGUE. The system gives audible
feedback and guides you if necessary through the relevant functions.
Optimum understanding of the voice commands depends on the following
factors:
● Speak at a normal volume, without intonation and excessive voice pauses.
● Avoid insufficient articulation.
● Close the doors, windows and sliding roof, in order to reduce or stop disturbing
exterior noise.
● It is recommended to speak louder at higher speeds, so that the tone of your
voice is louder than the increased surrounding noise.
● During the dialogue avoid additional noise in the vehicle, e.g. simultaneously
talking occupants.
● Do not speak, if the system makes an announcement.
● The microphone for voice control is inserted in the moulded headliner and di-
rected to the driver and front passenger. Therefore the driver and the front pas-
senger can operate the equipment.
If a voice command is not detected, the system answers with "Sorry?" and a new
entry can be performed. After the 2nd error the system repeats the aid. After the
3rd error the answer "Procedure cancelled" is given and the dialogue is ended.
Switch on voice control (dialogue)
● by briefly pressing the
button on the adapter
● by pressing the
button on the multi-function steering wheel for a longer
1
⇒  f ig.
time
112.
1)
Not valid for vehicles which are fitted with the radio navigation system Columbus.
Switching off voice control (dialogue)
If the system is currently playing a message, you will need to stop the message
currently being played:
● by briefly pressing the
● by pressing the
time.
If the system expects a voice command, you can end the dialogue yourself:
● Do some with the CANCEL voice command;
● by pressing the
● by pressing the
time.
● The dialogue of an incoming call is immediately interrupted.
● The voice control is only possible in vehicles fitted with a multi-function steer-
ing wheel with telephone control or a phone holder and adapter.
Voice commands
Basic voice commands for operating the telephone control unit
1)
⇒  f ig.
111;
button on the adapter
1
button on the multi-function steering wheel for a longer
button on the adapter
1
button on the multi-function steering wheel for a longer
Note
Voice command
After this command the system repeats all possible
HELP
commands.
With this command you call up the contact from the
CALL XYZ
phone book ⇒  p age 125.
After this command, for example the phone book can
PHONE BOOK
be repeated, a voice entry for the contact can be up-
dated or deleted etc.
CALL HISTORY
Lists of dialled numbers, missed calls, etc.
After this command a phone number can be entered
DIAL NUMBER
which establishes a connection to the requested par-
ty.
After this command the system selects the last se-
REDIAL
lected telephone number.
1)
;
1)
;
Action
£

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents