Variable Loading Floor In The Luggage Compartment - Skoda Yeti Owner's Manual

74 Seats and Stowage
Pull the strap through the tensioning clasp, first of all on the one side and
–
then on the other side.
Remove the static separation net behind the rear seats
– Slacken the bands on both sides and take off the carabines
– Push the cross rod first of all on the one side and then on the other side to-
wards the rear.
– Take the cross rod out of the mounts
Pack static separation net
Press the red button of the joint
–
– Put the separation net folded together in the bag and close it.
– Attach the bag with the aid of the plastic carabines to the eyes on the left and
right luggage compartment trim panel.
Installing and removing the static separation net behind the rear seats with varia-
ble loading floor ⇒ p age 74 is carried out analogously as behind the rear seats
without variable loading floor. Use the lower fixing eyes on the carrier rails in or-
der to attach the carabines.
⇒ f ig. 62
The opening in the separation net is designed to feed through the
D
three-point seat belt ⇒ p age 135.

Variable loading floor in the luggage compartment

Remove variable loading floor
Fig. 63 Luggage compartment: Fold up variable loading floor/remove
⇒ f ig.
C 62.
B .
- so that it releases.
A
The variable loading floor makes it easier to handle bulky goods and creates an
even luggage compartment floor when the rear seat backrests are folded forward.
The maximum permissible surface load of the variable loading floor is 75 kg.
Removing the variable loading floor
You can fold together the loading floor by moving it in direction of arrow
–
⇒ f ig.
63.
– Raise the variable loading floor in direction of arrow
Pull on both sides of the locking levers in direction of arrow
–
Pull the variable loading floor up and out in direction of arrow
–
– The installation of the variable loading floor is carried out in the reverse order.
Secure the variable loading floor in the raised position
Fold up the hooks on the fastening strip in direction of arrow
–
– Fold up the variable loading floor behind the seat backrests of the rear seats.
– Fold down the hooks in direction of arrow
Support the variable loading floor on the hooks folded downwards.
–
WARNING

Pay attention when installing the variable loading floor that the carrier rails
and the variable loading floor are correctly fixed, otherwise the occupants are
at risk.
Note
If the variable loading floor is installed, no flexible storage compartment can be in-
stalled.
1
⇒ f ig.
2 63.
⇒ f ig.
63.
3
.
4
⇒ f ig.
59.
1
⇒ f ig.
3 as far as the stop 59.
