Skoda Yeti Owner's Manual page 221

CAUTION
The towing eye must always be screwed in fully and firmly tightened, otherwise
the towing eye can tear when towing in or tow-starting!
Rear towing eye
Fig. 176 Rear bumper: Removing the cover/installing the towing eye
– Press on the upper half of the cover in direction of arrow
– Take the cover out of the rear bumper
Screw in the towing eye by hand to the left up to the stop
–
tighten it as much as possible. For tightening, we recommend that you use for
example the wheel wrench, the lashing eye of another vehicle or a similar ob-
ject which you can push through the eye.
In order to reinstall the cover after screwing out the towing eye, first of all in-
–
sert the upper part of the cover and then press in the lower part. The cover
must engage firmly.
CAUTION
The towing eye must always be screwed in fully and firmly tightened, otherwise
the towing eye can tear when towing in or tow-starting!
Using the system Safety
⇒ f ig.
1 176.
⇒ f ig. 176
- left.
⇒ f ig. 176
- right and
Driving Tips


General Maintenance Breakdown assistance
Breakdown assistance 219
Technical data