Type 3C - Pke + Xpresskit Bypass + Directed Smartstart + Viper/Python/Clifford Directed Remote - Directed Electronics 2102T Installation Manual

Type 3c - PKE + Xpresskit Bypass + DIRECTED SmartStart + Viper/Python/Clifford
Directed Remote Starter (with 4-pin antenna connector)
Note: 8210 Antenna Universal Adapter is required and sold separately.
87
87a
86 85
30
(+) Starter Wire
Starter Disable:
This connection is
optional and ad-
ditional parts are
sold separately.
This toggle switch will
bypass the starter disable.
Refer to the
Antenna Location
and Installation Points
section on page 5 for
more information.
*Sold separately.
**Antenna, Antenna harness & DIRECTED SmartStart
***10-foot Antenna Cable is included in the PKE kit.
**** Door sense: The polarity of the door sense in the vehicle will determine which wire to connect
from the PKE to the DIRECTED Remote Starter.
12
(-) Door Sense****
(+) Ignition Output
(+) Brake
(+) Door Sense****
Connect these wires
to the vehicle.
(-) Horn Output: Red/White: 3
(+) Door Sense Input: White/Purple: 4****
(+) Brake Input: Purple/Black: 5
(-) Starter Kill Output: White/Black: 6
(-) Door Sense Input: Blue/White: 10****
Antenna (18 feet)
Antenna (12 feet)*
(Part# SANT-PKE12)
Antenna (8 feet)
(-) Ground: Black: 2
3 wires red
connector
(+) 12v: Red: 4
(+) 12v: Red: 4
RX: Green: 3
(-) Ground: Black: 2
TX: Blue: 1
Antenna Harness**
Antenna**
Optional
D2D Y CABLE
DIRECTED
SmartStart
cable are sold with your Remote Starter kit.
TM
The remote starter model will
determine which connector to use.
Refer to the DIRECTED SmartStart
install guide for proper connection.
ESP Black
Connector
OR
ESP Red
Connector
D2D Red
Connector
8210*
8210 Main
Universal
Adaptor*: Refer
to the 8210 guide.
8210*
Prog. Button
CABLE**
RX
(-) Ground
*
TX
TM
(+)12v
LED
© 2012 Directed� All rights reserved�
Not Used