System Settings - Danfoss C67 User Manual

10.3 Indirectly connected heating system with
or without mixing loop and primarily
connected storage tank with built-in heating
coil

System settings

Circuit Line Description
I 17
I 43
I 51
I 53
I 67
I 140
I 152
Heating circuit II can only be operated against heating circuit I.
This means that heating circuit II cannot be supplied if heating
circuit I is deactivated.
Influence on desired flow temp.
Priority or parallel operation
DHW charging pump /
changeover valve
Desired flow temperature at
DHW charging
Adaptive function of S2 flow
temperature during DHW
charging
Function of temperature sensor
S5
Max limitation temperature at
sensor S2 during DHW charging
10d
Recomm.
setting
3
99
OFF
OFF
OFF
0 (1)
90