Danfoss C67 User Manual page 51

Service parameter(s) 21
21 Total stop
Circuit
I / (II)
Decide whether you want a total stop during the setback
temperature period.
ON: The desired flow temperature is lowered
OFF: No total stop
Setting range
ON / OFF
to 10 °C. The min. setting of the flow
temperature (line 2, section 22) is overruled.
Desired flow
temp. (°C)
10 °C
Desired flow
temp. (°C)
10 °C
32e
Factory setting
OFF / (OFF)
Time
Time
The grey
side of the
ECL Card