Hoover Ultra User Manual page 5

1 0
Attach hose rack
Remove tool and taped screw from
1 0
rack.
Insert projections on rack into slots on
back of cleaner.
1 3
Then continue wrapping hose as
1 3
shown snapping end of hose con-
nector into clip.
1 6
For Ultra models
The powered hand tool is shipped
1 6
in a plastic bag for protection.
Remove the bag before using the tool
by first opening tool door.
1 1
Slide rack down into place. Insert
1 1
screw at (D) and tighten with a
Phillips screwdriver.
1 4
Position tool in holder at base of
1 4
cleaner and snap it into place as
shown at arrow.
1 7
A
To remove tool (A), pull it down and
1 7
outward.
To reposition the tool, reverse this proce-
dure.
For Plus models
To store stair/upholstery nozzle (B), open
tool door, place nozzle in bracket and fit
it securely into position. To remove,
reverse this procedure.
1 2
D
Storing hose & tools
Store hose on rack by first position-
1 2
ing hose in front section of clip.
1 5
Slide bare floor attachment into
1 5
holder as shown.
1 8
B B
How to reattach tool
cover
The tool cover is designed with a
1 8
break-away feature which allows it
to snap free if it is pushed open too far.
To reattach, align hinges of cover with
slots on sides of tool storage area.
Push cover down to secure in place.
5