The deep cleaner may also be lift-
ed by placing a hand under the
upper clean solution tank handle as
The brush indicator will spin (F)
when the deep cleaner is turned
ON and the brushes are rotating.
If the indicator does not spin and the
pattern is visible (G) when the deep
cleaner is turned ON, the brushes are
There are three reasons why the brushes
may not be rotating:
1. Brush speed selector set on OFF (see
2. Handle in upright position (see
"CIeaning mode indicator," p. 6).
3. Brush indicator screen dirty.
Automatic "shut off"
When the re c o v e ry tank (lower tank) is
full the automatic shutoff mechanism
will shut off the deep cleaner suction ( s u c-
tion will be noticeably reduced).
At that time the red float disk will rise to
the top of the recovery tank lid (E). The
deep cleaner will no longer pick up dirty
solution and the motor sound will
become noticeably higher in pitch.
When this happens turn deep cleaner
off and empty recovery tank before
Check clean solution tank also; it may
need to be refilled.
To clean screen (H), turn deep cl e a n-
er off and disconnect from electrical
o u t l e t .
Remove clear cover and wipe off screen
with a damp cloth. Snap cover back into
Brush speed selector
Your 'SteamVac' deep cleaner has
three agitator brush settings.
Hl - for normal cleaning of carpet and
LO - for gentle cleaning of carpets and
OFF - for cleaning carpets and bare
floors when brushing is not desired.
(Such as when picking up liquid spills.
See page 10.)
Slide selector button to the desired set-
ting before cleaning.
Clean solution tank
The clean solution tank holds the clean-
ing solution that is to be dispersed onto
the surface to be cleaned.
How to fill
Disconnect deep cleaner from
Place deep cleaner handle in the
upright, locked position.
To remove tank, press down on handle
and pull forward.
Carry tank to a sink.