Adjusting The Pitch In Semitones (Pitch Shift) - Yamaha Clavinova CVP-809 Owner's Manual

Top of the Song
NOTE
• When you want to repeat from the top of the song to somewhere in the middle of the song:
1. Turn on the A-B Repeat icon, then start Song playback.
2. Touch the A-B Repeat icon again at the desired ending point (B).
• Specifying only Point A results in repeat playback between Point A and the end of the Song.
4
Touch [J] (Stop) to stop playback.
The Song position will return to Point A.
After your practice, turn off
Specifying the repeat range while Songs are stopped
1. Fast-forward the Song to Point A then turn on
2. Fast-forward the Song to Point B then touch
Playing Multiple Songs Repeatedly
You can play several songs repeatedly. Select "All" or "Random" in "Repeat Mode" ([Menu] → [SongSetting]
→ [Play]), then touch [R/K] (Play/Pause) to start playback. All Songs saved in a designated folder will then
be played repeatedly in either consecutive order or random order. To reset the repeat setting, select "Off " in
"Repeat Mode. "

Adjusting the Pitch in Semitones (Pitch Shift)

Audio
MIDI
Like the Transpose function (page 41) of the MIDI Song, the pitch of an Audio Song in the USB flash drive
can be adjusted in semitone steps (from -12 to 12) on the Home display.
1
Connect the USB flash drive containing Audio Songs to the [USB TO DEVICE]
terminal.
NOTE
Before using a USB flash drive, be sure to read "Connecting USB Devices" on page 100.
2
Select an Audio Song (steps 1 – 2 on page 67).
3
In the Song area (when expanded) of the Home display, touch
call up the Setup window.
NOTE
Pitch Shift cannot be applied to MP3 files of 48.0 kHz sample rate.
A
(A-B Repeat).
(A-B Repeat).
(A-B Repeat) again.
B
End of the Song
(Pitch Shift) to
CVP-809/CVP-805 Owner's Manual
5
73