Changing Parameter Settings; Recalling Default Parameter Settings; Reading The Software Version; Reading The Hardware Version - Harris DA-DHR6802+ Installation And Operation Manual

Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 3: Operation

Changing Parameter Settings

Recalling Default Parameter Settings

Reading the Software Version

Reading the Hardware Version

26
You can change module parameter settings locally with the card-edge
jumper or remotely by selecting the Reclocking Mode parameter
setting.
You cannot recall default parameter settings for DA-DHR/DH/DSR/
DS/HR/H6802+ modules.
The current software version of your pertinent module can be viewed
using Pilot (via Ethernet control). See your CCS Pilot User Manual or
Online Help for information on viewing software versions.
The current hardware revision of your pertinent module can be viewed
using Pilot (via Ethernet control). See your CCS Pilot User Manual or
Online Help for information on viewing hardware identifiers.
DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual