Controller; Host System Requirements; Processor; Memory - Konica Minolta magicolor 2590MF Technical Manual

Hide thumbs Also See for magicolor 2590MF:
Table of Contents

Advertisement

Controller

The magicolor 2590MF uses the power of the
host operating system to provide superior,
cost-effective performance.

Host System Requirements

Windows
333 MHz Celeron
®
-class PC
128 MB RAM
128 MB free hard disk space
CD-ROM/DVD drive for drivers and utilities
Macintosh
Power Mac G3 (minimum); Power Mac G4 or later (recommended)
256 MB free hard disk space
CD-ROM/DVD drive 1x or faster

Processor

The magicolor 2590MF use the power of the host computer's operating
system for processing documents prior to printing. The controller's ASIC
provides better performance than comparable processors because most
image operations are executed in the hardware rather than with multiple,
slower software commands.

Memory

160 MB SDRAM
(128 MB on main controller, 32 MB on network controller)
This RAM is sufficient for all simplex and duplex printing and copying,
camera direct photo printing, and scanning at all supported resolutions.
Additional memory is not required because the magicolor 2590MF uses
a highly efficient compression rate, and the embedded memory has
been carefully synchronized with the internal processor.
12

Advertisement

Table of Contents
loading

Table of Contents