Custom Master Tv Setup Procedure - LG Centric X950 Series Commercial Mode S Setyp Manual

Custom Master TV Setup Procedure

1. Turn ON the TV.
The next step depends on whether the EZ-Manager Wizard appears on
the screen when you turn ON the TV:
• If the wizard is displayed, the TV is in the required factory default state.
Exit the wizard, and then continue with step 2.
• If the wizard is not displayed, restore the TV to a factory default
condition before continuing with this procedure. See Reference section,
"Restoring Factory Defaults on the TV(s)," as necessary, for further
information.
2. Set Installer Menu items.
This step provides specific instruction only on the Installer Menu items
that should be set on a Master TV. Refer to pages 22 to 31 for detailed
information on all Installer Menu items.
a) Use the Installer Remote to access the PTC Installer Menu (see
"Accessing the Installer Menu" on page 22 for further information).
b) Set Installer Menu item 003 BAND/AFC, as appropriate.
• Broadcast: Set to 0.
• CATV: Set to 1 (default).
c) Set any other Installer Menu items that affect your TV programming
network to the required configuration. For example, enable/disable
Aux inputs, set a Start Channel, etc.
If you intend to use a TLX file for cloning purposes, you may also
configure selected settings in the IP Environment Menu (accessible
from the Installer Menu). See "IP Environment Setup" on pages 53 to
60 for further information. In particular, if you intend to use the Wi-Fi
Zoning feature, you must configure the wireless network connection
as part of the Master TV Setup. However, note that you cannot return
directly to the Installer Menu from the IP Environment Menu; thus, you
may wish to set all Installer Menu items as needed before you access
the IP Environment Menu. Otherwise, you will need to reaccess the
Installer Menu to set additional items.
d) After you have adjusted all Installer Menu item settings as required,
press OK once on the Installer Remote to save your changes; then,
press OK again to exit the menu.
206-4263
• HRC: Set to 2.
• IRC: Set to 3.
Custom Master TV Setup (Cont.)
xxLY750H PTC INSTALLER MENU
000 INSTALLER SEQ
UPN 000-000-000-000
PTC V1.00.015
117
003
Installer Menu items, as required.
CPU-CTV
000
ASIC D279
CPU V3.11.00
Typical Installer Menu
FACT DEFAULT 000
BAND/AFC 001
Adjust the values for these
(Continued on next page)
33