LG Centric X950 Series Commercial Mode S Setyp Manual page 38

Cloning Procedures (Cont.)
Learn Setup from Master TV
1. Ensure the Master TV is set up completely and in Pass-through Mode
(i.e., the TV setup menus should be displayed when you press MENU
SETTINGS on the Installer Remote).
2. Insert the USB memory device into either of the USB ports on the Master
TV.
3. Press MENU SETTINGS on the Installer Remote to display the TV setup
menus. Use the arrow navigation keys to select/highlight the Option menu
icon, and then press the number "7" key a total of seven times to display
the USB Download Menu.
4. To gain access to the "Learn From TV" options in the USB Download Menu,
key in the following number sequence on the Installer Remote: 9-8-7-6.
5. Use the Up/Down arrow keys to select Learn From TV (TLX), and then
press OK.
6. In the Learn From TV (TLX) window, to differentiate this TLX file from
others, you can use the Up/Down arrow keys to change the last five digits
of the filename. Press OK when you are ready to initiate Learning.
Learning status will be shown on a progress bar in a new window. Do NOT
remove the USB device until Learning is complete. When the Learning
process is complete, the USB Download Menu will reappear on the screen.
7. When Learning is done, press
Download Menu, and remove the USB memory device from the Master
TV.
Teach Master TV Setup to Target TV
1. Turn ON the Target TV.
2. The next step depends on whether the EZ-Manager Wizard appears on
the screen when you turn ON the TV:
• If the wizard is displayed, the TV is in the required factory default state. To
continue with this procedure (see also note below), exit the wizard, and
then continue with step 3.
• If the wizard is not displayed, restore the TV to a factory default condition
before continuing with this procedure. See Reference section, "Restoring
Factory Defaults on the TV(s)," as necessary, for further information.
Note: If desired, you can complete the Teaching process via the EZ-
Manager Wizard (see "USB Configuration" on pages 18 to 19) or using the
LG Smart Install utility (see "LG Smart Install Utility" on pages 20 to 21).
38
on the Installer Remote to exit the USB
USB Download Menu
USB Download Menu
Upgrade TV Software
Upgrade TV Software
Upgrade PTC Software
Upgrade PTC Software
Teach To TV (TLL)
Diagnostics
Teach To TV (TLX)
Teach To TV (TLL)
Learn From TV (TLL)
Teach To TV (TLX)
Learn From TV (TLX)
Learn From TV (TLL)
Learn From TV (TLX)
Previous
Previous
Note: The Diagnostics option in
this menu is for service use only.
Learn From TV (TLX)
Select the file name and press OK to start
xxLY750H-UA00003.TLX
V
Previous
Learn From TV
UPDATING...
Do not unplug!
(Continued on next page)
OK
OK
OK
25%
206-4263