Ez-Manager Wizard; Before You Begin - LG Centric X950 Series Commercial Mode S Setyp Manual

EZ-Manager Wizard

The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated or manual)
of configuring the essential Installer Menu items for Pro:Centric operation. The wizard will appear on the
screen each time the TV is turned ON, until one of its configuration methods has been completed or the
wizard is exited. Use the Installer Remote to make selections and complete each wizard step.
While the EZ-Manager Wizard is intended primarily for Pro:Centric-related configuration, the wizard also
offers Zoning as well as USB configuration options.
• LY750H TVs support the TV Zoning and Wi-Fi Zoning features, both of which enable location-specific
settings (see Reference section, "Using the TV's Zoning Features," for further information). The EZ-
Manager Wizard enables you to set the TV Zone # and/or the Wi-Fi Zone # in the TV as part of the
configuration process.
• The EZ-Manager Wizard also enables you to redirect to the TV's standard USB Download Menu as part
of the configuration process, if desired, to perform USB configuration functions, including FTG Mode
configuration, cloning, splash image downloads, and software upgrades.
• You can connect a USB memory device to the TV at any time while the wizard is in progress (starting at
the Welcome screen) to use the LG Smart Install utility to perform USB configuration functions. Any file(s)
you wish to use for configuration purposes must be stored in a folder named "LGSMARTINSTALL" in the
root directory of the USB memory device. See "LG Smart Install Utility" on pages 20 to 21 for further
information.
Caution: Do NOT unplug the TV power cord or remove the antenna cable or, if applicable,
the LAN cable during the configuration process, as doing so will interrupt the current step
and may corrupt the configuration data.

Before You Begin

• If you plan to create a Master TV Setup using the procedure described on pages 32 to 35, be sure to exit
the EZ-Manager Wizard in order to avoid setting modes that may restrict the custom setup procedure.
See also "Initiate Configuration or Exit the EZ-Manager Wizard" on the following page.
• If it has been completed or exited and therefore does not display, the EZ-Manager Wizard can be
reactivated; however, this requires that you restore the TV to a factory default condition. See Reference
section, "Restoring Factory Defaults on the TV(s)," for further information.
• Each wizard step is allotted a time frame after which the wizard proceeds without user interaction. If the
Pro:Centric server is configured on the system and if no location-specific settings are required in the TV,
for example, TV Zone, Wi-Fi Zone, Label, and/or Room Number settings, you can simply turn ON the TV,
and once initiated, the wizard will proceed through each of the configuration steps with no further user
interaction.
• If any of the configuration steps fails, you will see a "Diagnostics" screen with an indication of the failure.
You will then have the opportunity to reinitiate the configuration process from the previous screen or exit
the EZ-Manager Wizard.
• If you wish to enable media sharing (i.e., Smart Share, Wi-Fi Screen Share, and DMR) on the TV without
using a TLX file for configuration purposes, you will need to create a custom Master TV Setup and use the
IP Environment Menu to specify the settings. Custom Master TV Setup is described on pages 32 to 35.
Refer to "IP Environment Setup" on pages 53 to 60 for information on the IP Environment Menu.
12
206-4263