IBM Rack Power Distribution Unit Installation And Maintenance Manual page 12

•
•
•
•
•
•
•
Notes:
1. Power cables for devices that you will connect to the 100-127V Rack PDU or the
2. You will have some unused parts depending upon how you install the Rack PDU.
You will need the following tools to install the Rack PDU in a rack cabinet:
•
•
•
2
IBM Distributed Power Interconnect Rack Power Distribution Unit:Installation and Maintenance Guide
One cable-management bracket (for vertical installations)
One 1U-mounting bracket
One 1U blank filler panel
Miscellaneous hardware kit (for attaching the Rack PDU to a mounting plate or
bracket and installing the Rack PDU in a rack cabinet)
Cable straps
™
IBM NetBAY Rack Safety Information book
This documentation
Universal Rack PDU do not come with the Rack PDU.
One Phillips screwdriver
One 10 mm (11/32-in.) wrench
One cage-nut-insertion tool or flat-blade screwdriver (for installing cage nuts in
some rack cabinets)