Table of Contents
Advertisement
WHITE/BROWN
H1/4
This wire connects to pin 87a of the onboard light flash relay. It is used when-
ever light switch isolation on the vehicle is necessary. If the vehicle has a mul-
tiplex circuit that needs the light switch isolated, you can remove the onboard
light flash fuse and replace it with the specified resistor (paying attention to the
polarity selection).
BLACK
H1/5
We recommend that you do not use a factory ground. Ground all your compo-
nents to the same point in the vehicle, (preferably the kick panel). Scrape away
any paint and use a factory bolt or make your own ground with a self-tapping
screw and a star washer.
© 2008 Directed Electronics. All rights reserved.
LIGHT FLASH -ISOLATION WIRE - PIN 87a of onboard relay
(-) CHASSIS GROUND
15
Hide quick links:
Advertisement
Table of Contents
