Table of Contents
Advertisement
Parallel Mode 1
Purpose:
To control the pull-up resistors on the parallel port signals. This menu item is useful for personal
computers that have open collector outputs on the parallel port signals.
Values:
On
Disables the resistors.
Off*
Enables the resistors.
Parallel Mode 2
Purpose:
To determine whether the parallel port data is sampled on the leading or trailing edge of strobe.
Values:
On*
Samples parallel port data on the leading edge of strobe.
Off
Samples parallel port data on the trailing edge of strobe.
PCL SmartSwitch
Purpose:
To configure the printer so it automatically switches to PCL emulation when a print job received
through the parallel port requires it, regardless of the default printer language.
Values:
On*
Printer examines data on the parallel interface and selects PCL emulation if the data
indicates that is the required printer language.
Off
Printer does not examine the incoming data. The printer uses PostScript emulation to
process the job if PS SmartSwitch is On, or uses the default printer language specified in the
Setup Menu if PS SmartSwitch is Off.
See also:
Printer
Language;
PS SmartSwitch
177
Advertisement
Table of Contents
