Setup Required; Staples Low; Std Bin Full - IBM 1220 User Reference

Setup Required

What this message means:
•
When you unpacked the printer, you left a piece of packing material inside.
•
A hardware component, such as an optional paper drawer, has not been installed correctly.
What you can do:
•
Remove all packing material from inside the printer.
•
Correctly install the component.
See also:
Setup Guide

Staples Low

What this message means:
The stapler has only a few staples remaining.
What you can do:
•
Press Go to continue printing.
•
Install a new staple cartridge to clear the message.

Std Bin Full

What this message means:
The standard bin is full.
What you can do:
Remove the stack of paper in the bin to clear the message.
99