Table of Contents
Advertisement
30
Disabling the operator panel menus
A network administrator can lock the printer menus to keep others from changing default menu settings
from the operator panel.
To disable the menus:
1
Turn the printer off.
2
Press and hold the
3
Release the buttons when Performing Self Test appears on the display.
When the printer self test completes, Config Menu appears.
4
Press
until you see Panel Menus, and then press
Menu
5
Press
until you see Disable, and then press
Menu
Saved briefly appears, followed by Disabling Menus. Config Menu appears again with Panel
Menus on the second line.
6
Press
until you see Exit Config Menu, and then press
Menu
Activating Menu Changes briefly appears, followed by Performing Self Test. The
printer returns to the Ready message.
Note: Once this procedure is completed, if the
displays the Ready status message, the message Menus Disabled appears. If
the printer is holding a confidential job or held job (Reserve Print, Repeat Print, or
Verify Print), you can still access these jobs through the Job Menu.
Enabling the menus
To enable the menus, repeat the steps in
step 5 on page
65, select Enable instead of Disable. After you press
displayed.
and
buttons, and then turn the printer on.
Select
Return
Disabling the operator panel
65
.
Select
.
Select
.
Select
button is pressed when the printer
Menu
menus. However, in
, Enabling Menus is
Select
Advertisement
Table of Contents
