Table of Contents
Advertisement
29
Restoring factory default settings
1
Make sure the printer is on and the Ready message appears.
2
Press
until you see Utilities Menu, and then press
Menu
3
Press
until you see Factory Defaults, and then press
Menu
4
When Restore appears, press
appears followed by the Ready message.
When you select Restore:
–
No other button actions are available on the operator panel while Restoring Factory
Defaults appears.
–
All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) are
deleted. (Resources residing in flash memory or on the optional hard disk are unaffected.)
–
All menu settings are returned to the factory default values, except:
•
The operator panel Display Language setting in the Setup Menu.
•
All settings in the Parallel Menu, Serial Menu, Network Menu, Infrared Menu,
LocalTalk Menu, and USB Menu.
If you need more information about changing menu settings or selecting new user default settings, see
Changing menu
settings.
. The message Restoring Factory Defaults
Select
64
.
Select
.
Select
Advertisement
Table of Contents
