Table of Contents
Advertisement
80 Fuser Maintenance
What this message means:
The counter that tracks wear on the fuser has reached its limit.
What you can do:
•
Press Go to continue printing.
•
If print quality is unacceptable, replace the fuser.
See also:
Replacing the fuser
81 Engine Code
CRC Failure
What this message means:
Microcode in the engine flash code module has failed a system check.
What you can do:
•
Press
to clear the message.
Go
•
Discard the code. Retransmit the microcode data from the host computer.
82 Waste Bottle Nearly Full
What this message means:
The toner waste container is almost full.
What you can do:
•
Press Go to clear the message and continue printing.
•
Replace the toner waste container.
See also:
82 Waste Toner Bottle
Full;
Replacing the toner waste container
115
Advertisement
Table of Contents
