Parallel Buffer; Parallel Mode 1; Parallel Mode 2 - IBM Infoprint 1125 User Reference

Parallel Buffer

Purpose:
To configure the size of the parallel input buffer.
Values:
Disabled
Auto*
3K to maximum
size allowed
See also:
Resource Save

Parallel Mode 1

Purpose:
To control the pull-up resistors on the parallel port signals. This menu item is useful for personal
computers that have open collector outputs on the parallel port signals.
Values:
On
Off*

Parallel Mode 2

Purpose:
To determine whether the parallel port data is sampled on the leading or trailing edge of strobe.
Values:
On*
Off
Argecy Computer Corporation 248-324-1800
Disables the parallel port.
Printer automatically calculates the Parallel Buffer size (recommended setting).
User specifies the Parallel Buffer size. The maximum size depends on the
amount of memory in your printer, the size of the other link buffers, and
whether Resource Save is set to On or Off. To maximize the range for the
Parallel Buffer size, disable or reduce the size of the serial, infrared, LocalTalk,
and USB buffers.
Note: Changing the Parallel Buffer menu item automatically resets the printer.
Disables the resistors.
Enables the resistors.
Samples parallel port data on the leading edge of strobe.
Samples parallel port data on the trailing edge of strobe.
153