Hiniker 2752 Operator's Manual page 10

8 Operating Procedures
Disconnect the electrical connectors by pulling
them straight out from the receptacles. Do not
twist the connectors, twisting will damage the
connector pins or the wiring harness.
Disconnect Plugs
Back inside the truck, return control of the head-
lights to the truck and switch power off on the
snowplow control box, then slowly back the
truck out from the plow.
Turn Off Lights and Power
NOTE: The stop plate will automatically fall for-
ward as soon as the lift cylinder is fully extend-
ed for raising the blade prior to transporting the
plow.
If the snowplow won't be used for an extended
period of time, the prong weldment can be re-
moved from the truck by removing the hex bolts
that fasten it to the truck mount frame.
DWG NO. 3925
DWG NO. 4164