Compaq 154060-002 Installation Manual page 30

3-8 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide
6. Press Tab to highlight the software selections, and use the arrow keys to
highlight Compaq Extended Feature Supplement. Press Enter.
7. Press Tab to go back to the menu bar. Choose Software and press
Enter.
8. Choose Remove Software and press Enter.
9. You are prompted to verify the removal of all packages. Choose
Remove and press Enter.
10. When all the EFS packages have been removed, a message will display
that the kernel was relinked. Press Enter to continue.
11. At the message
Removal Complete
12. Exit the installation procedure:
a. Choose Host and press Enter.
b. Choose Exit and press Enter.
13. Continue with the step 5 of the procedure described in the next section
to install a new version of EFS.
WARNING: DO NOT reboot the system before installing the new EFS version.
Omit the first four steps of the procedure in the following section.
Installing the New EFS
1. Log in as root.
2. Enter
/etc/shutdown -g0 -y
3. At the Safe to Power Off message, press Enter.
4. When the system reboots, you will see the prompt
Press <Ctrl>+<d> or enter the root password.
Enter the root password to begin system maintenance mode.
5. Type and press Enter.
/etc/custom
The main custom menu should appear.
6. Choose Software (on the menu bar) and press Enter.
7. Choose Install New and press Enter.
8. You will be asked what host you want to install from. Select the local
host and press Enter.
NOTE: Only the local host is supported.
, press Enter to continue.
to shut down the system.