Gigabit Autosensing Ethernet Port Status Leds - H3C S5100-SI Series Installation Manual

Installation Manual
H3C S5100-SI/EI Series Ethernet Switches
Table 1-5 Description of the mode LED
LED
Mode LED

1.4.4 Gigabit Autosensing Ethernet Port Status LEDs

The Gigabit autosensing Ethernet port status LEDs are yellow-green indicator.
Table 1-6 Description of Gigabit autosensing Ethernet port status LEDs
Port mode
Rate mode
Duplex
mode
Mark Status
OFF
Green, ON
Mode
Yellow, ON
Green,
blinking (1 Hz)
LED status
ON
Green
Blinking (30 ms
per packet)
ON
Yellow
Blinking (30 ms
per packet)
Blinking (3 Hz)
OFF
ON
Green
Blinking (30 ms
per packet)
ON
Yellow Blinking (30 ms
per packet)
Blinking (3 Hz)
OFF
1-25
Chapter 1 Product Overview
Description
Invalid
The port LED is indicating rate mode.
The port LED is indicating duplex mode.
The port LED is indicating PoE mode.
Description
The port is connected at 1,000
Mbps.
The port is receiving or sending
data at 1,000 Mbps.
The port is connected at 10/100
Mbps.
The port is receiving or sending
data at 10/100 Mbps.
Port POST has failed.
The port is not connected.
The port is working in full duplex
mode.
The port is receiving or sending
data in full duplex mode.
The port is working in half duplex
mode.
The port is receiving or sending
data in half duplex mode.
Port POST has failed.
The port is not connected.