S5100-48P-Ei Ethernet Switch - H3C S5100-SI Series Installation Manual

Installation Manual
H3C S5100-SI/EI Series Ethernet Switches
Note:
For the description of RPS and the auxiliary cables, see RPS500-A3 User Manual and
RPS1000-A3 User Manual.
IV. Cooling system
An S5100-24P-EI Ethernet switch provides one fan for heat dissipation.

1.3.4 S5100-48P-EI Ethernet Switch

I. Front panel
An S5100-48P-EI Ethernet switch provides 48 x 10/100/1000Base-T autosensing
Ethernet ports, four 1000Base-X SFP ports, and one console port on the front panel. An
SFP port and its corresponding 10/100/1000Base-T autosensing Ethernet port form a
Combo port. That is, only one of the two ports forming the Combo port can be used at a
time. Table 1-2 shows the mapping relations between the ports forming the Combo port.
Figure 1-16 shows the front panel of an S5100-48P-EI Ethernet switch.
(1): 10/100/1000Base-T autosensing Ethernet port status LEDs
(2): Console port
(3): 7-segment digitron display
(5): Ethernet port mode switching LED
(7): DC power LED
Figure 1-16 Front panel of an S5100-48P-EI Ethernet switch
(4): Port status LED mode switch
(6): Power LED
(8): 1000Base-X SFP port status LED
1-12
Chapter 1 Product Overview