Faxing Letter/Legal/Folio Size Documents From The Scanner Glass - Brother MFC-9*970CDW Basic User's Manual

e
Enter the fax number using the dial pad.
You can also enter the fax number on
the LCD by pressing Address Book
and Send a fax, or you can press an
One Touch key on the machine's control
panel. (For details, see How to dial
on page 42.)
f
Press Mono Start or Colour Start.
Faxing from the ADF
 The machine starts scanning the
document.
Faxing from the scanner glass
If Real Time TX is On, the machine
will send the document without asking if
there are additional pages to scan.
 If you press Mono Start, the
machine starts scanning the first
page.
Do one of the following:
• To send a single page, press No
(or press Mono Start again). The
machine starts sending the
document.
• To send more than one page,
press Yes and place the next
page on the scanner glass. Press
Mono Start. The machine starts
scanning the page. (Repeat this
step for each additional page.)
 If you press Colour Start and
Yes (Color fax), the machine
starts sending the document.
Note
To cancel, press Stop/Exit.
Faxing Letter/Legal/Folio size
documents from the scanner
glass
When faxing Letter/Legal/Folio size
documents, you will need to set the scan
glass size to Letter or Legal/Folio;
otherwise, a portion of your faxes will be
missing.
a
Press (FAX).
b
Press d or c to display
Glass ScanSize.
Press Glass ScanSize.
c
Press Letter or Legal/Folio.
d
Press Stop/Exit.
Note
You can save the setting you use most
often by setting it as the default. (See
Setting your changes as the new default in
Chapter 3 of the Advanced User's Guide.)
Sending a fax
4
4
29