Aaa And Policy Configuration - Cisco ASR 5000 Series Administration Manual

Hrpd serving gateway
Hide thumbs Also See for ASR 5000 Series:
Table of Contents

Advertisement

▀ Configuring the System to Perform as a Standalone HSGW
The Fully Qualified Domain Name (FQDN) command is used to identify the HSGW to a P-GW during HSGW
selection. The FQDN is included in an APN on the P-GW.
The
protocol.
The
HSGW service.
The IP header compression command is optional and enables, in this service, the RoHC profile configuration
created in the Global Configuration Mode. Refer to the
for more information.
The address used in the binding entry must be the IP address configured as the HSGW-to-ePCF A10/A11
interface in the
The HSGW defaults to a MAG service configured in the same context unless the mobile-access-gateway context
<
Configuring the MAG Service
Use the following example to configure the MAG service:
Notes:
The information element set is used to identify mobility options sent in PBUs from the MAG to the LMA.
"custom1" is custom set of option specific to a Starent customer. The default setting is "standard".
The address used in the binding entry must be the IP address configured as the HSGW-to-PGW S2a interface in
the
Creating and Configuring an HSGW Context

AAA and Policy Configuration

Step 1
Configure AAA and policy interfaces by applying the example configuration in the
Context
section.
Step 2
Configure the default subscriber for the AAA context by applying the example configuration in the
Default Subscriber
Step 3
Create and configure QCI to QoS mapping by applying the example configuration in the
Mapping
section.
▄ Cisco ASR 5000 Series HRPD Serving Gateway Administration Guide
commands are used to configure Generic Routing Encapsulation (GRE) parameters for the A10
command can be used if the DNS client is configured in a different context from the
Creating and Configuring an HSGW Context
> mag-service <
section.
Optional Header Compression Configuration
section.
> command is used as defined above.
section.
HSGW Configuration
Creating and Configuring the AAA
Modifying the
Configuring QCI-QoS
section
OL-22984-01

Advertisement

Table of Contents
loading

Table of Contents