Cisco ASR 5000 Series Administration Manual page 84

▀ Saving the Configuration on the Chassis
Keyword/Variable Description
-noconfirm Optional: Indicates that no confirmation is to be given prior to saving the configuration information to the
specified filename (if one was specified) or to the currently active configuration file (if none was specified).
showsecrets Optional: This keyword causes the CLI configuration file to be saved with all passwords in plain text, rather
than their default encrypted format.
verbose Optional: Specifies that every parameter that is being saved to the new configuration file should be displayed.
Important:
command does not synchronize the local file system. If you have added, modified, or deleted other files or directories to
or from a local device for the active SPC/SMC, then you must synchronize the local file system on both SPCs/SMCs.
To save a configuration file called system.cfg to a directory that was previously created called cfgfiles on the
SPC's/SMC's CompactFlash, enter the following command:
To save a configuration file called simple_ip.cfg to a directory called host_name_configs using an FTP server with an IP
address of 192.168.34.156 on which you have an account with a username of administrator and a password of secure,
use the following command:
To save a configuration file called init_config.cfg to the root directory of a TFTP server with a hostname of
config_server, enter the following command:
▄ Cisco ASR 5000 Series HRPD Serving Gateway Administration Guide
The keyword is only applicable when saving a configuration file to local devices.This
Verifying and Saving Your Configuration
OL-22984-01