IBM NETCOOL 4.3-W User Manual page 469

Field
debug
Note: Before proceeding to the next step, be sure you have configured each cucm.properties file in the directories
you created in Step 6.
9. CUCM environment only: Start all ProvisoCUCM applications by running the
directory that you created in Step 6.
ProvisoCUCM writes a log file in the same directory where its
the log file to make sure that ProvisoCUCM is successfully communicating with the CUCM server. Also,
verify that CSV files are being generated to the output directories (
perfmon_output_dir
Note: Be sure that all ProvisoCUCM instances are operating successfully before proceeding to the next step.
10. Define global variables.
Global variables are specific to each CCM or CUCM cluster. You assign values to global variables in either
of the following files:
—
CCMConfig.js
—
CUCMConfig.js
The Cisco IP Telephony Technology Pack includes the configuration files
CUCMConfig.js
/opt/datachannel/scripts
These configuration files contain sample values. Edit either or both files to assign values appropriate for
locations in your Cisco IP Telephony CCM or CUCM environment. The following table describes the global
variables to define:
Variable
CUSTOMERNAME
CMCLUSTER
OUTBOUNDPREFIX
Netcool/Proviso Cisco IP Telephony Technology Pack User's Guide, Version 4.3-W
Description
If , enables debug mode for ProvisoCUCM operations. Error
true
information pertaining to the SOAP interaction with the CUCM server is
written to a log file. The log file resides in the same directory as the
ProvisoCUCM.jar
If , debug mode is not enabled.
false
Example: debug=true
).
. with CCM clusters
with CUCM clusters
. In Step 2-e, you copied these files to
).
Description
String specifying the customer's identifier. This value allows automatic grouping
and report navigation by customer.
Example: var CUSTOMERNAME="TELINDUS";
String specifying the cluster's identifier. This value allows automatic grouping and
report navigation by cluster.
Example: var CMCLUSTER="SF";
Integer specifying the prefix to dial to call outside of the PBX (for example,
within the US, or within Europe.)
0
Example: var OUTBOUNDPREFIX=0;
and files.
cucm.properties
startcucm.sh
ProvisoCUCM.jar
cdr_output_dir
CCMConfig.js
DATA_CHANNEL_HOME/scripts
Appendix A: Configuration
file in each
file resides. Monitor
and/or
and
(typically,
9
447