Table of Contents
Advertisement
Appendix A: Configuration
3-c. Click the
Configuration
3-d. Click the
Collection
3-e. Click
Refresh
The predefined data collection requests are loaded into the Request Editor from the database.
3-f. Click the
Inactive
3-g. In the
Sub-Element Groups
groups:
Root->Sub-Element Collect->Cisco
3-h. Click the
Active
requests from
3-i. Click
.
Save
4.
Merge the technology pack's sub-element inventory text files.
Sub-element inventory control rules for the Cisco IP Telephony Technology Pack are contained in the file
voip_cisco_ipt_inventory_subelements.txt
DataMart server:
$PVMHOME/APFiles/voip_cisco_ipt/datamart/conf
You must merge the contents of this file with the file
$PVMHOME/conf (typically, /opt/datamart/conf) on the DataMart server:
To merge the sub-element inventory control rules for the Cisco IP Telephony Technology Pack, follow these
steps:
4-a. Change your working directory to
cd $PVMHOME/conf
4-b. Copy
voip_cisco_ipt_inventory_subelements.txt
entering the following command:
cp $PVMHOME/APFiles/voip_cisco_ipt/datamart/conf/voip_cisco_ipt_inventory_subelements.txt .
4-c. Make a backup copy of the inventory_subelements.txt file by entering the following
command:
cp inventory_subelements.txt inventory_subelements.txt.ORIG
4-d. Append the contents of
inventory_subelements.txt
cat voip_cisco_ipt_inventory_subelements.txt >> inventory_subelements.txt
Important:
Ensure that you use two forward brackets (>>); otherwise, the original contents of
inventory_subelements.txt will be overwritten.
4-e. Perform a
diff
shown in the following example:
diff inventory_subelements.txt inventory_subelements.txt.ORIG
Important:
If you do not have a CCM environment, skip Step 5 and continue with Step 6.
5.
CCM environment only: Configure the Data Direct SQL Server Bridge
The Netcool/Proviso Cisco IP Telephony Technology Pack collects data from SNMP devices and, through
SQL for Call Detail Records, from each CCM database.
442
tab, then click
Request Editor
tab.
.
button in the
group box to display only idle requests.
Filter
pane, select all idle data collection requests in the following group or
box under
. The Request Editor toggles the idle setting for these data collection
Details
to
in the
idle
active
Active
$PVMHOME/conf
voip_cisco_ipt_inventory_subelements.txt
, by entering the following command:
on the backed-up file and the appended file to ensure that the merge succeeded, as
Netcool/Proviso Cisco IP Telephony Technology Pack User's Guide, Version 4.3-W
to open the Request Editor.
column.
, which is installed in the following directory on the
inventory_subelements.txt
by entering the following command:
to the
located in
directory, by
$PVMHOME/conf
to
Advertisement
Table of Contents
