Table of Contents
Advertisement
Appendix A: Configuration
Field
resend_sent_files
grace_period
run_interval
perfmon_interval
446
Description
If
, the CUCM server will re-send files that it has already successfully
true
sent. Since the CUCM can be configured to send data files to any host
specified by CUCM Web administration configuration settings, this field
must be set to
to ensure that data files are also sent to the
true
DataChannel host that requested them.
Use the
setting in the following situations:
false
•
If you prefer to have the data files pushed back to the DataChannel
host according to a schedule specified by CUCM Web administration
configuration settings. Set the CUCM configuration to push the data
files back to the DataChannel server where the ProvisoCUCM
instance is running.
•
If data files are being pushed back to the DataChannel host too slowly
for your needs.
If this field is
, the ProvisoCUCM instance will request the data files
false
from the CUCM server and receive none. It will then check for the data
files in the location specified by the CUCM Web administration
configuration (at time intervals specified by
). If the files are there, ProvisoCUCM retrieves the
perfmon_interval
files and generates the CSV output to
with Perfmon data) on the DataChannel host
perfmon_output_dir
that requested the data.
Example: resend_sent_files=true
The time, in milliseconds, to subtract from the polling start time. The
polling start time is the time that the ProvisoCUCM instance begins
polling the CUCM server for data.
The grace period is intended to help you avoid missing data files that the
CUCM has not yet written for the current time period.
ProvisoCUCM uses the polling start time specified in the field
of the file
start_time
cucm.TIMESTAMP
directory as the
cucm.properties
If the file does not exist when ProvisoCUCM is instantiated, it starts
polling the CUCM server immediately, creates
writes the current time to it.
Example grace period (100 seconds): grace_period=100000
Example start time (1/20/2009 at 12:00): start_time=1232470820931
The interval, in milliseconds, at which ProvisoCUCM polls the CUCM
server for CDR and CMR data files, and checks
data files pushed there by the CUCM server.
Example (15 minutes): run_interval=900000
The interval, in milliseconds, at which ProvisoCUCM polls the CUCM
server for Perfmon data files, and checks
data files pushed there by the CUCM server.
Example (5 minutes): run_interval=300000
Netcool/Proviso Cisco IP Telephony Technology Pack User's Guide, Version 4.3-W
or
run_interval
(or
cdr_output_dir
. This file resides in the same
file.
cucm.TIMESTAMP
cdr_output_dir
perfmon_output_dir
, and
for
for
Advertisement
Table of Contents
