Registering A Unit - Panasonic KX-TG8412C Operating Instructions Manual

TG8412C(e).book Page 25 Tuesday, February 3, 2009 1:41 PM
■ Erasing a number:
{ERASE} i {V}/{^}: "Yes"
i {SELECT} i {OFF}
Note:
L When editing, press the desired dial
key to add, {CLEAR} to erase.
L When viewing, {w/o NUM} appears if
the block calls without phone number
feature is turned on. To turn the
feature off: {w/o NUM} i {V} i
{SAVE} i {OFF}
Display mode
Available for:
KX-TGA840C/KX-TGA740C handset
You can select to display either a single
item or multiple items on one screen at a
time for the following features:
– menu list, phonebook list, caller list,
redial list, and call block list
– handset top menu icons in function
menu
Select the desired setting:
– "Multi items": Multiple entries/all
menu icons are shown on one screen
at a time.
– "Single item": An entry/a menu
icon is shown on one screen in large
characters at a time.
The default setting is "Multi items".
1
{MENU} (centre of joystick) i
{#}{1}{9}{2}
2
{V}/{^}: Select the desired setting.
i {SAVE}
3
{OFF}
Note:
L When {MULTI} or {SINGLE} is
displayed as a right soft key on the
handset, you can temporarily switch
the display mode by pressing
{MULTI} or {SINGLE} (page 11).
Programming
L When {MULTI} or "Multi items" is
selected as the display mode, you can
move screens by pushing the joystick
right or left, without scrolling down or
up through the list:
– Push the joystick right to go to the
next screen.
– Push the joystick left to return to the
previous screen.

Registering a unit

Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L See page 4 for information on the
available model.
Registering a handset to a
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
1
Handset:
{MENU} (centre of joystick) i
{#}{1}{3}{0}
2
Base unit:
Press and hold {LOCATOR} for
about 4 seconds. (No registration
tone)
L If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L The next step must be completed
within 90 seconds.
25