Message Alert - Panasonic KX-TG8412C Operating Instructions Manual

TG8412C(e).book Page 32 Tuesday, February 3, 2009 1:41 PM
Voice Mail Service
2
{V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Listening to Voice Mail
messages
The unit lets you know that you have
new Voice Mail messages in the
following ways:
– "New Voice Mail" is displayed on
the handset if message indication
service is available.
– The message indicator on the handset
flashes slowly if message alert feature
is turned on ("Message alert", page
right).
1
Press {C}, then press {VM} within
15 seconds.
OR
{MENU} (centre of joystick) i
{#}{3}{3}{0}
L The speakerphone turns on.
2
Follow the pre-recorded
instructions.
3
When finished, press {OFF}.
Note:
L If {VM} is not displayed, the Voice
Mail access number has not been
stored. Store the number (page 31).
L If the handset still indicates there are
new messages even after you have
listened to all new messages, turn it
off by pressing and holding {OFF}
until the handset beeps.
L If your Voice Mail service uses Voice
Mail tones and a message is over 3
minutes long, the handset may not
indicate new messages.
L If your Voice Mail service uses Voice
Mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
to listen to Voice Mail messages, you
32
have to dial your access number
manually.

Message alert

You can select whether or not the
message indicator on the handset
flashes slowly when new messages are
recorded. The default setting is "On".
1
{MENU} (centre of joystick) i
{#}{3}{4}{0}
2
{V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Note:
L While message alert is on, battery
operating time is shortened (page 9).