Table of Contents
Advertisement
TG8412C(e).book Page 18 Tuesday, February 3, 2009 1:41 PM
Programming
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 18)
– using the direct commands (page 20)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU} (centre of joystick)
2
Select the desired top-menu by pushing the joystick in any direction. i
{SELECT}
3
Push the joystick down or up to select the desired item in sub-menu 1. i
{SELECT}
L In some cases, you may need to select from sub-menu 2. i {SELECT}
4
Push the joystick down or up to select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L See page 20 for the default settings.
Main menu
Sub-menu 1
Caller list
W
Set date / time
Date and time
E
Alarm
Time adjust
V.M. access
#
Intercom
x
18
Sub-menu 2
–
–
*1
–
–
*1
–
–
–
–
–
Page
29
12
23
–
32
33
Advertisement
Table of Contents
