Table of Contents
Advertisement
TG8412C(e).book Page 12 Tuesday, February 3, 2009 1:41 PM
Getting Started
L When "Multi items" is selected as
the display mode, you can switch the
screen to confirm the detailed
information by pressing {SINGLE}.
Screen saver mode
Available for:
KX-TGA840C handset
The backlight goes dark when on a
call or turns off completely after 1
minute of inactivity if the handset is not
on the base unit or charger.
Activate the handset display again by:
– pushing the joystick left {<} or right
{>} when on a call.
– pressing {OFF} at all other times.
Initial settings
Symbol meaning:
Example: {V}/{^}: "Off"
Push the joystick down or up to
select the words in quotations.
Display language
You can select either "English" or
"Français" as the display language.
The default setting is "English".
1
{MENU} (centre of joystick) i
{#}{1}{1}{0}
2
{V}/{^}: Select the desired setting.
3
Press down the centre of the joystick
to save. i {OFF}
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is "Tone".
12
"Tone": For tone dial service.
"Pulse": For rotary/pulse dial service.
1
{MENU} (centre of joystick) i
{#}{1}{2}{0}
2
{V}/{^}: Select the desired setting.
3
{SAVE} i {OFF}
Date and time
1
{MENU} (centre of joystick) i
{#}{1}{0}{1}
2
Enter the current month, date, and
year by selecting 2 digits for each.
Example: July 15, 2009
{0}{7} {1}{5} {0}{9}
3
{OK}
4
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0}{9} {3}{0}
5
{AM/PM}: Select "AM" or "PM".
6
{SAVE} i {OFF}
Note:
L When English is selected as the
display language, 12-hour clock
format is used. When French is
selected, 24-hour clock format is
used.
L To correct a digit, push the joystick left
or right to move the cursor to the digit,
then make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
Advertisement
Table of Contents
