Table of Contents
Advertisement
FTP Client Request Validation
Description: FTP Client Request Validation
This function is used whenever the System i5 is a client, issuing FTP commands to a remote
system.
Where used:
Server Identifier:
Format Name:
Levels Supported:
Usage Notes/Limitations:
At Level 3 or Level 4 you can implement IP address controls. This will allow you to limit what
target addresses/systems an FTP client can connect to. See commands:
CHGFTPSET IPCTLC(*YES) and WRKTCPIPA *FTPCLIENT
You can also review 'Setting up TCP/IP Address Controls' in Chapter 3 of this guide.
Recommended
Setting:
Important Note:
When the FTP Client point is set to Level 4, only the GET and PUT FTP sub-commands are
required. The other commands, when using the FTP Client, are for the TARGET SYSTEM
ONLY (sent to/run on the target system).
When authorizing users to the GET/PUT sub-commands, the assumed object authority is
reversed from authorities required for the FTP Server point and the same objects.
See the following examples.
System i5 command lines, interactive and batch jobs can initiate an FTP
client request
*FTPClient
VLRQ0100
Basic
Intermediate
Advanced
Level 4, Log All
SafeNet/400 Reference Guide
© Copyright 2008 MP Associates of Westchester, Inc.
V8.50 - May 2008
(Level 1,2)
(Level 3)
(Level 4)
12.33
Advertisement
Table of Contents
