Table of Contents
Advertisement
If you still cannot resolve the problem
1. Check all the joblogs for the jobs in the subsystems:
QSYSWRK
QSERVER
2. You may have to change the QDFTJOBD job description to capture the joblogs of certain
jobs initiated by client requests.
CHGJOBD QDFTJOBD LOGLVL(4 00 *SECLVL) LOGCLPGM(*YES)
Note: Remember to change this back to its default when you have resolved the problem or
you may generate an excessive number of joblogs.
CHGJOBD QDFTJOBD LOGLVL(4 00 *NOLIST) LOGCLPGM(*NO)
3. End then start both subsystems:
QSYSWRK
QSERVER
4. Try the client request again
5. Check for joblogs and errors
6.
You may have to end and re-start QSYSWRK and QSERVER to force joblog creation.
Also try ENDTCPSVR *ALL, ENDHOSTSVR *ALL; then STRTCP and
STRHOSTSVR *ALL.
To determine if the problem is with the server or a client, try this process with another client
application that may access the same server.
10.6
SafeNet/400 Reference Guide
© Copyright 2008 MP Associates of Westchester, Inc.
V8.50 - May 2008
Advertisement
Table of Contents
