Fixed Ip Addresses - IBM Safenet/400 Reference Manual

Fixed IP Addresses

To assign IP addresses to devices, from the DHCP Menu select Option 6 – Manually Maintain
Permanent, Static IP Addressed Devices or use the SNDHCPPR command
Even if you are not using DHCP on your System i5, you can use this option to do PING checks
for network troubleshooting.
If you enter a DHCP IP address you will receive an error message. This is for fixed IP addresses
only.
SafeNet/400 Reference Guide
© Copyright 2008 MP Associates of Westchester, Inc.
5.6
V8.50 - May 2008