Table of Contents
Advertisement
Chapter 11 - SPECIAL SAFENET/400 CONSIDERATIONS
This section contains information on procedures that will help you manage and automate certain
SafeNet/400 functions.
Resetting Level 5 within SafeNet/400
When an installation has a user exit program in place that SafeNet/400 does not recognize, the
exit point will automatically be set to Level 5 (unsupported). To allow SafeNet/400 to support
this server you must do the following:
1.
Remove your user exit program from the registration facility in OS/400.
Type WRKREGINF and press ENTER
Locate the exit point and remove your exit program.
Important: Do not remove any program called from PCSECLIB.
You may have several servers set to Level 5. You must remove each one. Then, using
the DSPNETA or CHGNETA command, verify that the System i5 network attributes
DDMACC and PCSACC are both set to *OBJAUT.
If these attributes are not initially set to *OBJAUT, SafeNet/400 will flag several exit
points to Level 5.
2.
Type the following:
CALL PCSECLIB/DELST5CL and press ENTER
3.
From the SafeNet/400 Main Menu select Option 1 - Work with Server Security
Settings or use WRKSRV command.
Press F3 to exit without making any changes
4.
Using the System i5 console, you must place the system in a restricted state with the
ENDSBS *ALL *IMMED command, or any other site-specific shutdown process.
5.
De-activate SafeNet/400
From the Special Jobs Menu select Option 6 - Activate/De-Activate SafeNet/400
SafeNet/400 Reference Guide
© Copyright 2008 MP Associates of Westchester, Inc.
V8.50 - May 2008
11.1
Advertisement
Table of Contents
