Ping Checker - IBM Safenet/400 Reference Manual

Ping Checker

You can use this option to ping a single IP address or a range of addresses.
From the DHCP Menu select Option 10 – IP Address Range Ping Checker
Enter the range of IP addresses that you want to ping.
Press ENTER and you will begin to see replies flash on the bottom of the screen.
When all the IP addresses have been pinged the Status column will display the results of the
pings.
SafeNet/400 Reference Guide
© Copyright 2008 MP Associates of Westchester, Inc.
5.8
V8.50 - May 2008