Tube Channel Assembly Replacement - Heatilator Eco-Choice ECO-WINS18 Owner's Manual

G. Tube Channel Assembly Replacement
Removing Tube Channel Assembly
1. Remove the right side bricks (3 pieces).
2. Remove the baffl e protection channel by rolling forward
and out of the fi rebox.
3. Locate the 3 channel nuts inside of chamber and remove
using a 7/16 socket wrench.
NOTE: Soak the bolts with penetrating oil for at least 15 min-
utes before trying to remove them.
4. Slide the tube channel assembly all the way to left until it
Figure 24.1
24
Downloaded from www.Manualslib.com
TUBE CHANNEL NUTS
Heatilator • ECO-WINS18 • 7065-132D • November 22, 2011
manuals search engine
is off the threads. Drop the right side down, then slide
the assembly back to right.
5. The ceramic blanket and both baffl e boards can be
removed at the same time you remove the tube chan-
nel assembly.
6. When the tube channel assembly is free of the left
side support, rotate clockwise and pull assembly,
blanket and baffl es out through the front opening.
7. Re-install in reverse order.
CERAMIC
BLANKET
BAFFLE BOARDS
1
2
3
4
BAFFLE PROTECTION
CHANNEL