AMX 16-Channel Custom Panel Interface AXP-CPI16 Operation/Reference Manual page 6

AXP-CPI16 Specifications (Cont.)
AXlink Status LED
Device DIP Switch
Cables
2
Indicates AXlink communication status as follows:
• One blink per second communication is functioning.
• Two blinks per second devices specified in the master program do not match the
specified devices found.
• Three blinks per second indicate an AXlink communication error.
• Full-on indicates there is no AXlink control or activity (but power is on), or the Axcess
program is not loaded.
8-position DIP switch sets AXlink device ID.
Two 3-foot (91.4 cm) ribbon cables each with a female 20-pin header.
AXP-CPI16 16-Channel Custom Panel Interface