Lamp Settings - Chauvet Legend 330SR Spot User Manual

Operation

Lamp Settings

Lamp On/Off 1. Highlight On/Off.
Lamp Status During Power
Remote Turn Off 1. Highlight Off Via DMX.
Lamp On if DMX Present 1. Highlight On if DMX On.
Lamp Off if DMX Absent 1. Highlight Off if DMX Off.
Lamp Strike Delay 1. Highlight Ignition Delay.
Fixture Shut Off Delay 1. Highlight Low Power Delay.
-16-
From the Main Menu, highlight Lamp Settings and press <ENTER>.
The lamp will not turn on if the ambient temperature is 104 ºF (40 ºC) or higher.
2. To turn the lamp on or off, press <ENTER>.
a. Select ON to turn the lamp on or OFF to turn the lamp off.
b. Accept the selected option.
1. Highlight State/Power On.
On 2. To change the lamp status during power on, press <ENTER>.
a. Select ON to turn on the product and the lamp simultaneously or OFF to turn on
the product without turning on the lamp.
b. Accept the selected option.
2. To enable/disable remote turn off, press <ENTER>.
a. Select YES to enable product turn off from either a DMX controller or its power
switch, or NO to turn the product off only from its power switch.
b. Accept the selected option.
2. To turn the lamp on when DMX is present, press <ENTER>.
a. Select YES to turn the lamp on if DMX signal is present, or NO to turn the lamp
on only from the control panel.
b. Accept the selected option.
2. To turn the lamp off when DMX is absent, press <ENTER>.
a. Select YES to turn the lamp off if DMX signal is absent, or NO to turn the lamp
off only from the control panel.
b. Accept the selected option.
2. To set the lamp strike delay, press <ENTER>.
a. Select the delay before the lamp strikes after power up in seconds (0S–255S).
b. Accept the new value.
2. To set the lamp shut off delay, press <ENTER>.
a. Select the delay before the product powers off after lamp off in seconds
(0S–255S).
b. Accept the new value.
Legend™ 330SR Spot User Manual Rev. 1